Painless 10127 wiring harness.
1970 Plymouth Barracuda wiring harness.
1971 Plymouth Barracuda wiring harness.
1972 Plymouth Barracuda wiring harness.
1973 Plymouth Barracuda wiring harness.
1974 Plymouth Barracuda wiring harness.
The Painless universal Mopar muscle car wiring harness works well with the 1970-1974 Plymouth Barracuda and is recommended for use by Painless for the 1970-1974 Barracuda.
This universal 14-circuit harness features Mopar OEM color codes and our unique covered micro-fuse block.
Harness also features an auxiliary circuit with 20 amp relay for accessories such as fog lights, electric seats, electric window/lock or an electric fuel pump.
Number of Circuits: 12 Fuses w/ Horn Relay, Accessory
Relay and Maxi Fuse
Harness Length: Universal
Fuse Type: Mini Blade & Maxi Fuse
Firewall Passthrough: Multiple Grommet
Color Code Based: Factory Chrysler
Circuit Designations: Printed on Wires
THIS HARNESS INCLUDES CIRCUITS FOR:
Headlight Switch- Power to headlight switch. Power wires out of headlight switch to head light dimmer switch, tail lights, dash lights and park lights. Includes the headlight switch connector and terminals.
Dimmer Switch wires include power from headlight switch and power out to low and high beam headlights.
Wiper Switch- Power to wiper switch. Power from wiper switch to wiper and washer motors.
Turn Signal Switch- Power into and out of your column mounted turn signal switch. Includes new terminals for the turn signal switch. You must retain the factory connector.
Ignition Switch- Power into and out of to fuse block (ignition, crank and accessory) Brake Switch- Power into and out of brake switch.
Courtesy Lights- Power and ground circuits for dome light activation.
Alternator- Charge wire and alternator field activation wires. (Most alternators can easily be wired up to this Painless harness). Included in kit is a high output alternator wire that allows you to use up to a 140 Amp alternator.
Horn- 20 Amp horn relay mounted to fuseblock
Radio- Harness includes constant B+ (for preset memory) and ignition hot circuits for any aftermarket or factory radio.
Starter- Crank signal wire for starter solenoid. Engine section wires including electric choke, coil power, coil to tach signal, oil pressure, engine temperature, and A/C compressor clutch control wire.
Headlight section wires including right and left high and low beam headlights, turn signals and park lights. This harness kit includes six two-pin molded rubber connectors to replace the factory park and turn lights inline connectors.
TAIL SECTION WIRING INCLUDES:
turn signal lights
fuel gauge sender
third brake light
DASH PANEL SECTION WIRING INCLUDES:
This harness kit includes 30 lamp socket terminals to be used with the factory lamp sockets.
ALSO INCLUDED IN THE KIT:
fuseblock mounting bracket
4 inch zip ties
70 Amp maxi fuse
large assortment of crimp style connectors
Most important of all an illustrated installation manual that equips you with the needed information to install the harness to your vehicle. If you get stuck during the installation just give the Painless Performance tech line a call. They have an immense data base of vehicle specific information.
HOURS: 11:00 am to 6:00 pm Monday - Friday Eastern Standard Time
We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.
We will not ship to freight forwarding - expediting companies.
PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.