Edelbrock 1406 Edelbrock Performer carburetor.
Edelbrock Performer 600 cfm carburetor with electric choke.
The Edelbrock 1406 Performer carburetor is designed for small block engines with dual plane intake manifolds.
Includes both timed and full vacuum ports for ignition advance.
Includes installation instructions.
The Edelbrock 1406 Perfomer carburetors are quality built and designed to withstand the rigors of daily driving while delivering consistent, reliable street performance.
Metering rods are unaffected by engine backfires and can be changed in seconds for custom tuning without fuel spillage, fuel draining, or removing the carburetor from the manifold.
No power valves to blow out.
An all aluminum two piece body construction allows for no gaskets below the fuel level to prevent leakage.
Jets, floats, needles, springs and metering rods can be changed without fuel spillage, with the carburetor installed on the engine.
Edelbrock Performer carburetors "hold a tune" which means that, compared to other brands, when you tune the carburetor to your engine, it stays tuned and remains reliable and consistent.
The outside of the carburetor body is ball burnished for a bright finish.
The Performer series carburetors are user friendly and easy to tune for trouble free service.
A chrome plated steel fuel line designed for the Edelbrock carburetor shown above. Includes a flared fitting with a 3/8" hose barb for easy fuel line installations. Shown installed on an Edelbrock carburetor.
This fuel line and filter kit upgrade fits the Edelbrock carburetor shown above. This kit includes a chromed hard steel fuel line and a Russel polished aluminum fuel filter with -6 AN fitting size.
Allows the use of lower profile, drop base air cleaner designs.
An attractive and professional fuel line set up.
A carburetor heat insulating divided base gasket. Designed for use with the Edelbrock carburetor shown above.
Extra thick, .0320 to insulate the carburetor from heat to provide a cooler, denser fuel mixture for more power.
While the Edelbrock carburetor above comes with a thin base gasket, this extra thick heat insulating gasket allows the carburetor to run cooler which provides a denser fuel mixture for more power.
Available for both a divided gasket (#9266) for use with dual plane intake manifolds and an open center gasket (#9265) for use with single plane intakes. Find your style in the applications drop down box.
Includes longer carburetor mounting studs to provide for the additional thickness of the gasket.
Provides a Chevy mounting bracket for the throttle cable, Turbo 350 kickdown cable and cruise control cable. Designed for use with the Edelbrock carburetor shown above. Fits Chevy small block. All three positions are fully length adjustable. Mounts to the back intake manifold bolts on the drivers side of the engine.
Super sturdy, heavy metal design with a durable gold iridited quality finish.
Chrome throttle cable, Turbo 350 kickdown cable and cruise cable bracket. Desgined for use with the Edelbrock carburetor shown above. Fits Chevy small block. All three positions are fully length adjustable. Mounts to the back intake manifold bolts on the drivers side of the engine.
Super sturdy, heavy metal design with attractive chrome show car quality finish.
GM throttle cable, Turbo 350 transmission kick down cable bracket. Designed for use with the Edelbrock carburetor shown above. All positions are fully length adjustable. Chrome plated. Mounts to the drivers side rear carburetor mounting stud. Easy to install and make for a clean installation.
A pair of throttle return springs, universal in design and engineered to provide positive throttle return for increased safety. Works great with the Edelbrock carburetor shown above and the throttle cable brackets shown.
GM throttle linkage stud to attach your GM throttle cable to the throttle linkage arm of the Edelbrock carburetor. Installs into the large upper hole on the carburetors throttle linkage arm and requires a bushing to space the hole. 7/32" diameter.
This stud mounts the GM Turbo 350 kick down cable to the Edelbrock carburetors throttle linkage arm. Slips into the cables slider.
A ball stud throttle stud assortment. Provides several ball sizes and stud sizes for various non-GM cables. Attaches to the Edelbrock carburetors throttle linkage arm, in the large upper hole. Requires a hole bushing for installation.
|HOW TO ORDER:|
1. If there is an applications box, click, then scroll the applications box to find your vehicle.
2. Click on your vehicle.
3. Click "add to cart"
4. Enter your information and submit order.
HOURS: 11:00 am to 6:00 pm Monday - Friday Eastern Standard Time
We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.
We will not ship to freight forwarding - expediting companies.
PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.