Edlebrock 1413 Performer 800 cfm carburetor

The Edelbrock 800 cfm Performer EPS carburetor is designed and calibrated for maximum street performance.

Works well with the Edelbrock RPM and RPM air gap intake manifolds.

Features include a high capacity accelerator pump and an improved primary and secondary cluster design.

Light weight aluminum carburetor with a ball burnished shiny, chrome like, finish.

Bolts directly to square bore manifolds or spreadbore manifolds with dual bolt patterns.

Easy to use electric choke.

Durable two piece design makes it easy to change jets or adjust bloats.

Replace and tune the needles, springs, jets or floats without draining fuel.

Complete tuning can be done without removing the carburetor from the intake manifold.

A wide choice of jets, springs, and needles are available to allow you to zero in on the optimum calibration for your engine.

A detailed tuning and installation manual is included.

Timed and full vacuum ports are provided in the front with a 1/4" pipe threaded vacuum port in the rear of the carb.

The mechanical secondary air velocity valve senses air flow acording to demand and automatically regulates a smooth transition from part throttle to wide open throttle.

This carburetor is new, not remanufactured.

Scroll down the page for parts and accessories.

EDLEBROCK-1413$428.97

Click to enlargeEdelbrock 1480 calibration kit
Edelbrock 1480 carburetor calibration kit.

Works with Edelbrock 1407, 1410, 1412, and 1413 carburetors.

Includes a complete assortment of step-up springs, one pair of metering rod retaining springs and an assortment of jets and needles.

This kit makes it easy to custom tune your Edelbrock carburetor to your specific engine setup by having the required parts on hand.

Later on, should you decide to change your engine setup, chances are that you will have the parts required on hand. Image is not application specific.

METERING RODS: .065 x .037----.065 x .047----.068 x .047----.073 x .047----.073 x .052

JETS: .101----.104----.107----.110----.113----.116

E1480$69.97
Click to enlargeEdelbrock 8089 banjo fuel inlet
Edelbrock 8089 banjo fuel inlet fitting.

Replaces the original fuel inlet fitting and allows the use of low profile air cleaners.

5/8-20 male to 3/8 hose barb.

8089$15.97
Edelbrock 8087 fuel inlet fitting -6AN
Edelbrock 8087 fuel inlet fitting.

5/8-20 male to -6AN male fuel inlet fitting for Edelbrock carburetors.

This fitting replaces the original fuel inlet fitting and allows the use of -6AN hose fittings.

8087$13.97
Edelbrock 8090 fuel inlet for Edelbrock carbs
Edelbrock 8090 fuel lnlet fitting.

Replacement fuel inlet fitting for Edelbrock carburetors.

5/8-20 male to 3/8" female inverted flare.

8090$11.97
Edelbrock 1483 Ford throttle lever adapter
Edelbrock 1483 Ford throttle lever adapter.

Designed for Ford automatic transmission equipped vehicles with cable operated throttle.

(Will not fit A.O.D.) Accepts cruise control.

Mounts to the Edelbrock carburetors linkage.

Use with appropriate Edelbrock throttle linkage plate (available on this website).

1483$26.97
Edelbrock1491 Ford 351W throttle adapter plate
Edelbrock 1491 Ford 351W throttle cable adapter plate.

This plate repositions the stock throttle cable bracket to align with Edelbrock carburetor throttle arms.

Use with Edelbrock throttle lever adapter part number 1483 (available on this website) and the stock throttle cable bracket.

Designed for Ford 351W with cable activated throttle and automatic transmission kickdown rod.

Gold iridted finish.

1491$15.97
Edelbrock 1495 Ford 429-460 throttle cable plate
Edelbrock 1495 Ford 429 and 460 throttle cable plate.

Repositions the stock throttle cable brackets to align with the Edelbrock carburetors throttle arm.

Use with Edelbrock throttle lever adapter part number 1483 (available on this site).

Designed for Ford with cable activated throttle and automatic transmission kickdown rod.

Gold iridited finish.

1495$19.97
Edelbrock 1493 Ford 351M-400 throttle cable plate
Edelbrock 1493 Ford 351M and 400 throttle cable plate.

Repositions the stock throttle cable brackets to align with the Edelbrock carburetors throttle linkage.

Use with Edelbrock throttle lever adapter part number 1483 (available on this site).

Designed for Fords with cable activated throttle and automatic transmission kickdown rod.

Gold iridited finish.

1493$18.97
Edelbrock 1490 Ford 289-302 throttle cable bracket
Edelbrock 1490 Ford 289 and 302 throttle cable bracket.

Mounts to the intake manifold to correctly position the throttle cable in relation to the Edelbrock caburetors throttle linkage.

Gold iridite finish.

1490$19.97
Edelbrock 8011 Ford automatic trans kick down rod extension
Edelbrock 8011 Ford automatic transmission kick down rod extension.

For use with Edelbrock carburetors when the kick down rod is to short to reach.

8011$12.97
Edelbrock 8012 Chevy throttle-kick down extension
Edelbrock 8012 Chevrolet throttle cable and automatic transmission kick down cable extension kit.

Mounts to the carburetors throttle linkage for when the cable is not quite long enough.

Includes throttle ball stud for use with some universal throttle cables.

E-8012$15.97
Edelbrock 1481 Mopar throttle linkage adapter
Chrysler Dodge throttle linkage adapter by Edelbrock 1481.

Fits 1966 and newer Chrysler, Plymouth and Dodge.

Attaches to the Edelbrock carburetors throttle lever.

Accepts cruise control.

Use with the appropriate throttle cable plate (available on this website).

Gold iridite finish.

1481$15.97
Edelbrock 8003 Chrysler kick down rod extension
Edelbrock 8003 Chrysler automatic transmission kick down rod extension.

Fits the Chrylser 1/4" diameter rod.

For use with Edelbrock carburetors, when the rod is to short to hook up.

8003$9.97
Click to enlargeEdelbrock 1475 accelerator pump nozzles
Edelbrock 1475.

Edelbrock carburetor accelerator pump nozzles.

Fits all Performer, Thunder and Performer EPS carburetors.

Includes .024, .033 and .043 nozzles and gaskets.

1475$31.97
Edelbrock carburetor metering rods
Edelbrock carburetor metering rods.

These metering rods are designed for use with Edelbrock Performer Series and Thunder Series AVS carburetors.

An aid in tuning the carburetor to your engines fuel needs.

Sold in pairs.

Scroll the applications box to find your size.

RODS$14.97APPLICATIONS:: 
Click to enlargeEdelbrock 1464 step up springs
Edelbrock 1464.

Edelbrock carburetor step-up spring assortment.

For use with all Edelbrock Performer Series, Thunder AVS Series and Performer EPS Series carburetors.

Includes 5 spring sets to aid in tuning.

Each spring set includes 2 springs, for a total of 10 springs.

A 3"HG blue spring, a 4"HG yellow spring, a 5"HG orange spring, a 7"HG pink spring and a 8"HG plain spring.

1464$14.97
Edelbrock 9266 Edelbrock 9265 base gasket
A carburetor heat insulating divided base gasket. Designed for use with the Edelbrock carburetor shown above.

Extra thick, .0320 to insulate the carburetor from heat to provide a cooler, denser fuel mixture for more power.

While the Edelbrock carburetor above comes with a thin base gasket, this extra thick heat insulating gasket allows the carburetor to run cooler which provides a denser fuel mixture for more power.

Includes longer carburetor mounting studs to provide for the additional thickness of the gasket.

Available for both a divided gasket (#9266) for use with dual plane intake manifolds and an open center gasket (#9265) for use with single plane intakes.

Find your style in the applications drop down box.

9266-9265$24.97APPLICATIONS:: 
Edelbrock 8036 throttle bracket Chevy small block
Edelbrock 8036 bracket.

Provides a Chevy mounting bracket for the throttle cable, Turbo 350 kickdown cable and cruise control cable.

Fits Chevy small block.

All three positions are fully length adjustable.

Mounts to the back intake manifold bolts on the drivers side of the engine.

Super sturdy, heavy metal design.

Durable gold iridited quality finish.

E8036$34.97
Edelbrock 8030 throttle bracket Chevy small block
Chrome throttle cable, Turbo 350 kickdown cable and cruise cable bracket. Desgined for use with the Edelbrock carburetor shown above. Fits Chevy small block. All three positions are fully length adjustable. Mounts to the back intake manifold bolts on the drivers side of the engine.

Super sturdy, heavy metal design with attractive chrome show car quality finish.

E-8030$49.97
Carburetor throttle kick down bracket
GM throttle cable, Turbo 350 transmission kick down cable bracket.

Designed for use with the Edelbrock carburetor shown above.

All positions are fully length adjustable.

Chrome plated.

Mounts to the drivers side rear carburetor mounting stud.

Easy to install and make for a clean installation.

24283$24.97
Dual throttle return spring
A pair of throttle return springs.

Universal design.

Engineered to provide positive throttle return for increased safety.

Inner and outer spring are Electro-Nickel bright plated to resist rust.

Includes chrome-plated bracket that attaches to the drivers side, rear carburetor mounting stud.

Springs can also mount to the throttle cable bracket.

The other end of the springs fit into the bottom hole of the carburetors throttle linkage arm.

Can be used with many different throttle cable bracket designs.

MG19$10.97
GM throttle cable stud
GM throttle linkage stud to attach your GM throttle cable to the throttle linkage arm of the Edelbrock carburetor.

Installs into the large upper hole on the carburetors throttle linkage arm and requires a bushing to space the hole.

7/32" diameter threaded stud.

H-2037$7.97
GM kick down cable stud
This stud mounts the GM Turbo 350 kick down cable to the Edelbrock carburetors throttle linkage arm.

Slips into the cables slider.

H20-40$7.97
Throttle ball stud assortment
A ball stud throttle stud assortment.

Provides several ball sizes and stud sizes for various non-GM cables.

Attaches to the Edelbrock carburetors throttle linkage arm, in the large upper hole.

Requires a hole bushing for installation.

202$19.97
Edelbrock 1472 Edelbrock carb gasket kit
Edelbrock 1472 Edelbrock carburetor gasket kit.

Fits all Edelbrock Performer Series, Thunder AVS series and Performer EPS Series carburetors.

Includes the gaskets shown.

1472$19.97
Click to enlargeEdelbrock 1477 carburetor rebuild kit
Edelbrock 1477 Edelbrock carburetor rebuild kit.

Includes parts and gaskets to rebuild all of Edelbrock Performer Series, Performer EPS Series and Thunder AVS series carburetors.

(Floats not included.)

1477$49.97
Edelbrock 1469 Edelbrock carburetor floats
Edelbrock 1469.

Edelbrock carburetor floats.

Fits Edelbrock Performer Series, Thunder AVS Series and Performer EPS Series carburetors.

Includes two floats, two pins and a float setting gauge.

1469$19.97
Edelbrock 1473 carburetor linkage kit
Edelbrock 1473.

Edelbrock Performer Series carburetor linkage kit.

Kit includes 7 links in gold iridite finish and 6 retaining clips.

1473$19.97

PayPal Acceptance Mark




We welcome CANADIAN customers! For ordering information, click on "Orders To Canada" at the top left side of this page.

We will not ship to freight forwarding - expediting companies.

PAYMENT METHODS: PayPal, Visa, Mastercard, Discover, American Express, money orders.

ecommerce provided by Yahoo! Small Business